Glossy Crystal Silicone Ink

Product Overview

Glossy Crystal Silicone Ink is a two-component, addition-curing silicone printing system designed to create transparent, smooth and high-gloss effects on textile surfaces.

The product can be applied as a clear topcoat over colored or high-density silicone prints. It can also be printed directly to create transparent gel graphics, glossy lettering, rounded 3D effects and crystal-clear raised logos.

Its controlled flow and leveling properties help reduce screen marks while maintaining the required print shape. After complete curing, the silicone forms a flexible elastomeric layer that moves with the fabric and provides good resistance to stretching, washing and normal garment wear.

Glossy Crystal Silicone Ink is particularly suitable for sportswear, footwear and premium fashion applications where clarity, gloss and flexibility are equally important.

Key Features

• High transparency with minimal surface haze

• Bright, crystal-like gloss

• Smooth and uniform surface leveling

• Flexible with good elastic recovery

• Suitable for raised and rounded 3D effects

• Good shape retention during curing

• Clear visibility of underlying colors

• Dry and non-tacky surface after complete curing

• Good adhesion to compatible textile substrates

• Resistance to cracking, peeling and deformation

• Good washing and abrasion durability

• Suitable for manual and compatible automatic screen printing

• Can be used as a transparent topcoat or direct-printing silicone

• Compatible with high-density and colored silicone systems

Product Benefits

Crystal-Clear Transparency

The transparent silicone layer allows the underlying color and printed design to remain clearly visible. It enhances color depth without creating excessive cloudiness or changing the original appearance of the design.

High-Gloss Surface

The ink creates a smooth, bright and glass-like finish after complete curing. Its leveling properties help reduce visible screen marks and provide a more uniform surface.

Flexible 3D Effect

Glossy Crystal Silicone Ink can be built through controlled printing layers to create raised, rounded and dimensional effects. The cured print remains flexible and can stretch with compatible fabrics.

Good Shape Retention

The material maintains its intended shape during flash curing and final curing. This helps prevent excessive spreading, sinking and deformation in raised graphics.

Durable Performance

When the correct printing and curing conditions are used, the silicone layer provides reliable adhesion and resistance to washing, rubbing, bending and repeated stretching.

Enhanced Color Appearance

When applied over colored silicone, the transparent glossy layer increases visual depth and brightness, giving logos and graphics a more premium appearance.

Recommended Applications

Glossy Crystal Silicone Ink is suitable for:

• Transparent glossy topcoats

• Crystal-clear raised logos

• Rounded 3D printing effects

• Transparent gel graphics

• Glossy lettering and patterns

• High-density silicone finishing

• Sportswear branding

• Yoga wear and compression garments

• T-shirts, hoodies and fashion garments

• Footwear and shoe-upper decoration

• Garment labels and heat-transfer graphics

• Gloves, elastic tapes and webbing

• Bags and textile accessories

• Premium fashion decoration

Recommended Substrates

The product may be used on:

• Cotton

• Polyester

• Cotton/polyester blends

• Nylon

• Spandex and elastic fabrics

• Knitted and woven fabrics

• Selected coated textiles

• Compatible silicone heat-transfer systems

Adhesion, transparency and curing compatibility must be tested on the actual production fabric before bulk printing.

Coated nylon, waterproof fabrics and textiles with special surface treatments may require a compatible primer or dedicated bonding silicone. Fabrics containing substances that inhibit addition-curing silicone may require an anti-poisoning silicone system.

Available Product Options

Different product versions may be selected according to the printing method and required effect:

• Crystal-clear glossy silicone

• Transparent high-gloss topcoat

• Rounded-effect crystal silicone

• Soft glossy silicone

• High-density crystal silicone

• Manual-printing grade

• Machine-printing grade

• Low-temperature-curing grade

• Anti-poisoning grade

• Heat-transfer crystal silicone

• Custom gloss and hardness options

Product selection should be based on the fabric, printing equipment, print thickness and required final appearance.

Recommended Printing Process

1. Evaluate the Fabric

Test the production fabric for adhesion, heat resistance, surface treatment and silicone-curing compatibility.

2. Prepare the Silicone

Mix the crystal silicone base thoroughly before use. Use clean tools and avoid excessive high-speed mixing, which may introduce air bubbles.

3. Add the Catalyst

Add the specified catalyst immediately before printing. Follow the mixing ratio stated in the applicable Technical Data Sheet.

Mix slowly and thoroughly until the catalyst is evenly dispersed.

4. Remove Trapped Air

Allow the mixed silicone to stand briefly before printing. Vacuum degassing may be used when necessary to reduce trapped air and improve transparency.

5. Screen Print

Apply the silicone through a clean screen and suitable stencil. Use controlled squeegee pressure to produce an even deposit and minimize air entrapment.

For raised or rounded effects, build the required height through several controlled layers rather than applying excessive material in one pass.

6. Flash Cure Between Layers

Flash cure each printed layer only until it is stable enough to support the next application.

Excessive flash curing may reduce interlayer adhesion. Insufficient flash curing may cause spreading, sinking or loss of print definition.

7. Complete Final Curing

Complete final curing according to the recommended temperature and time. Thick or multilayer designs require sufficient heat to cure the entire silicone structure.

Verify the actual temperature reaching the printed fabric rather than relying only on the dryer display.

8. Cool and Inspect

Allow the finished print to cool completely before checking transparency, gloss, surface tack, adhesion and elasticity.

Tips for Maximum Transparency and Gloss

• Use clean screens, tools and mixing containers.

• Prevent dust, fibers and cured silicone particles from entering the ink.

• Mix slowly to minimize air bubbles.

• Use only compatible catalysts and additives.

• Avoid excessive pigment or incompatible colorants.

• Keep the printing table clean and level.

• Control flash curing between layers.

• Ensure complete final curing.

• Allow the print to cool before stacking or packaging.

• Test compatibility before applying it over another silicone layer.

Because transparent glossy silicone reveals small defects more clearly than opaque ink, clean production conditions are essential.

Typical Product Characteristics

Actual performance may vary according to the product grade, catalyst selection, fabric type, print thickness and curing equipment.

Quality-Control Recommendations

Before approving bulk production, evaluate:

• Transparency and clarity

• Surface gloss

• Bubble formation

• Surface smoothness

• Edge definition

• Interlayer adhesion

• Fabric-to-silicone adhesion

• Surface tack after curing

• Stretching and elastic recovery

• Cracking and peeling resistance

• Washing durability

• Dry and wet rubbing resistance

• Yellowing or discoloration

• Heat and aging stability

Testing methods and acceptance criteria should be selected according to the customer’s brand and end-use requirements.

Handling Precautions

• Keep the silicone base, catalyst and tools free from contamination.

• Use clean and dedicated containers and mixing equipment.

• Avoid contact with sulfur, amines, organotin compounds and other curing inhibitors.

• Do not return mixed silicone to the original container.

• Prepare only the amount that can be consumed within the stated working time.

• Keep containers tightly closed when not in use.

• Wear suitable protective gloves and other required safety equipment.

• Read the Safety Data Sheet before handling the product.

Storage and Packaging

Store the silicone base and catalyst separately in their original sealed containers. Keep the products in a cool, dry and well-ventilated area away from direct sunlight, excessive heat, moisture and contamination.

Reseal opened containers immediately after use.

Standard and customized packaging options are available. OEM packaging and private-label services may be provided subject to the minimum order quantity.

Customization and Technical Support

We can recommend a suitable Glossy Crystal Silicone Ink system according to the customer’s fabric, printing equipment and required surface effect.

Available support may include:

• Transparency and gloss adjustment

• Softness and hardness adjustment

• Curing-speed optimization

• Manual- and machine-printing recommendations

• Special-fabric adhesion solutions

• Anti-poisoning systems

• Heat-transfer applications

• Light tint and color customization

• OEM packaging and private labeling

• Sample testing and application guidance

Request a Sample

The final transparency, gloss and adhesion depend on the fabric, underlying ink layer, printing thickness and curing conditions.

For an accurate product recommendation, please provide:

• Fabric composition and color

• Photo or physical sample of the fabric

• Direct-printing or topcoat application

• Required print thickness

• Desired gloss level

• Manual or automatic printing process

• Available curing temperature

• Required washing and stretch performance

• Photo of the desired crystal effect

Our technical team will recommend a suitable Glossy Crystal Silicone Ink system and provide application guidance for sample testing.

Contact us today to request a sample or develop a customized crystal silicone effect for your textile application.